| _Bnu | Batman overwriting the screen is normal, but it definitely shouldnät lock up the computer... | 06:31 |
|---|---|---|
| _Bnu | Also shouldn't. | 06:31 |
| + RobDangerous (~Thunderbi@p200300ec8f13220038067cbd53241eaf.dip0.t-ipconnect.de) | 11:23 | |
| mntmn | yup. sounds like there is a zorro bus communication problem tryphoncosinus | 11:24 |
| mntmn | tryphoncosinus: first of all, did you try another zorro slot already? also, we could play with the dtack length register | 11:24 |
| - RobDangerous (QUIT: Ping timeout: 264 seconds) (~Thunderbi@p200300ec8f13220038067cbd53241eaf.dip0.t-ipconnect.de) | 14:09 | |
| cerv | Tryed another USB stick. Same. Still no boot. Can it be because it is in A4000T? | 14:42 |
| tryphoncosinus | I tried zorro slots 4 and 5 (bridgeboard slots). Now I try slot 2 and bustest is working normally with 0 error. I inserted again the ZZ9000CX : black screen with occasionally the workbench image. With Picasso IV, I remember there is a tool to set the flickerfixer frequencies (filifi program or someting like that). | 15:26 |
| tryphoncosinus | Also, I collected the frequency properties I use for the picasso flickerfixer : 50 Hz (NTSC), 60 Hz (PAL) with 31.1 kHz (default picasso setting). Both settings are working well with the I-Inc monitor. I connected it with the ZZ9000 (another A2000). NTSC : beautiful image appearing occasionally, PAL : image is always there but is jerky. Both A2000 are nativelly NTSC. Is ZZ9000 injects 50 or 60 Hz / 31 kHz by default ? It | 15:38 |
| tryphoncosinus | o flickerfixer and ZZ9000 scandoubler do not produce the same signal properties. | 15:38 |
| mntmn | tryphoncosinus: normally 50hz for pal and 60hz for ntsc, and you can set an env var to use 60hz for pal too | 16:57 |
| mntmn | tryphoncosinus: it sounds like you solved half of the problem, if another zorro slot gets you to 0 errors with bus test. | 16:58 |
| mntmn | tryphoncosinus: the other problem sounds like it is related to the sync signals on the videoslot, or interference on the cable. | 16:58 |
| + RobDangerous (~Thunderbi@p200300ec8f132200e97752df8a3d25d8.dip0.t-ipconnect.de) | 17:09 | |
| + S0rin (~S0rin@user/s0rin) | 17:15 | |
| - S0rin (QUIT: Quit: WeeChat 2.3) (~S0rin@user/s0rin) | 19:51 | |
| + S0rin (~S0rin@user/s0rin) | 19:55 | |
| - xet7 (QUIT: Remote host closed the connection) (~xet7@user/xet7) | 19:59 | |
| + xet7 (~xet7@user/xet7) | 20:00 | |
| - S0rin (QUIT: Ping timeout: 252 seconds) (~S0rin@user/s0rin) | 21:22 | |
| + S0rin (~S0rin@user/s0rin) | 21:26 | |
| - RobDangerous (QUIT: Ping timeout: 268 seconds) (~Thunderbi@p200300ec8f132200e97752df8a3d25d8.dip0.t-ipconnect.de) | 22:04 | |
| + KK (~KK@93-142-10-227.adsl.net.t-com.hr) | 22:32 | |
| KK | mntmn: 800x600 scan doubled output cannot be made to output at 50 hz? it's 60 hz only? | 22:40 |
| mntmn | KK: sorry i can't follow | 23:05 |
| tryphoncosinus | I made a complete test for NTSC/PAL resolutions with the same monitor (SyncMaster 214T). | 23:08 |
| tryphoncosinus | A2320 accept all without drawback and image appears as it should on the monitor. | 23:08 |
| tryphoncosinus | With ZZ9000, NTSC mode, screen is black most of the time. PAL resolution under workbench : image is jerkey and sometimes black. | 23:11 |
| tryphoncosinus | I changed hdmi cable : no difference. | 23:12 |
Generated by irclog2html.py 2.17.3 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!