| + utukku (~utukku@cpc95120-newt39-2-0-cust110.19-3.cable.virginm.net) | 00:46 | |
| utukku | Hi, It was suggested I ask my questions here :-). Received my latest ZZ9000 card few weeks ago. Finally added it to my A4000D 060 rev6. Everything looks ok and loaded ok. But when I try to play any demos, it gives me a black screen with the demo music playing no graphics at all. Alsothe same if I launch Turricane (all through WHDLOAD) the same thing happens. Using the firmware that came | 00:49 |
|---|---|---|
| utukku | with the card. | 00:49 |
| mntmn | utukku: what about the early startup menu, can you see that? or when switching to pal or ntsc in workbench? | 00:58 |
| utukku | I can see the eraly startup no problem, can even go into the boot menu | 01:01 |
| utukku | If I go into pref/screenmode and select a different resolution, and click test.. it shows up ok.. but then when it exits the whole screen gets garbled | 01:02 |
| utukku | not tried switching to ntsc...as am in pal country | 01:03 |
| mntmn | try ntsc modes too | 01:10 |
| mntmn | demos might be ntsc | 01:11 |
| utukku | ok | 01:11 |
| utukku | tried in ntsc and the same. | 01:16 |
| utukku | it's like the scandoubler isnt switching over for the graphics. The music is playing in the backround still. just a static grey screen with big red pointer that wont move | 01:18 |
| utukku | just ran the bustest on zztop. got a red screen with 1 error. | 01:28 |
| mntmn | oh | 01:32 |
| mntmn | also, what does "tried in ntsc and the same" mean? i meant: can you see wb if you switch it to NTSC HighRes | 01:33 |
| utukku | from the boot menu, i set it to ntsc, booted into wb. ran both the gamethen the demo, in fact tried a few demos. but the screen still did the same, i.e music plays but screen just all grey with red pointer. | 01:35 |
| mntmn | ah, so you could see wb through the scandoubler in ntsc HiRes? | 01:35 |
| utukku | yes | 01:35 |
| mntmn | ok what if you remove the picasso96 monitor driver from devs:monitors? | 01:36 |
| mntmn | (and reboot) | 01:36 |
| utukku | will try | 01:36 |
| utukku | it loads up into Pal hi res | 01:38 |
| mntmn | and when you launch the demo then? | 01:39 |
| utukku | right, the demo gfx show up correctly, but the music plays at like 3x its normal speed. | 01:40 |
| mntmn | btw which accelerator are you using? cyberstorm mk1? | 01:40 |
| mntmn | ok i don't think zz has to do anything with the music | 01:41 |
| utukku | Launched Turricane, and both the gfx and sound are normal.. so an improvement | 01:41 |
| mntmn | because zz is not doing anything when the driver is not active... except maybe if the network driver is active | 01:41 |
| utukku | nope, its just chucky built A3460? with an 060rev 6 on | 01:41 |
| - bfarmilo_ (QUIT: Ping timeout: 252 seconds) (~bfarmilo@202.56.40.240) | 01:42 | |
| utukku | on a chucky built A4000D rev B board | 01:42 |
| utukku | A3640 but with the 060 on, all done by chucky | 01:43 |
| mntmn | ok custom a4000 build? | 01:44 |
| utukku | I just tried the 1.9 firmware, so the network is active straightaway. | 01:44 |
| mntmn | does 1.9 work better for you? | 01:44 |
| utukku | it's a transplant that he does, takes chips off old board puts on new board. same with the a3640. but with adaptor for 060 | 01:45 |
| utukku | the network works first time | 01:45 |
| mntmn | hmm yeah but i meant the network driver could be a problem perhaps for the music, just a hunch | 01:46 |
| mntmn | so maybe disable it as well | 01:47 |
| mntmn | anyway i will release a new 1.9 very soon with some timing tuning settings | 01:47 |
| mntmn | in the meantime you can make sure that connectors are 100% clean and try different zorro slots so that you get rid of the 1 error in bustest | 01:48 |
| mntmn | need to sleep now as it is almost 2am here | 01:48 |
| mntmn | n8n8n8 | 01:48 |
| utukku | just disconnected the net via roadie. the Jesuson E's demo I been trying all night crashes now, biut others seem to work fine. | 01:48 |
| utukku | So I now need to redo the p69 drivvers? | 01:49 |
| utukku | ok will do | 01:49 |
| utukku | ahh right, without that p69 driver, the bus test gives no errors. | 01:50 |
| utukku | ok cheers. | 01:50 |
| - utukku (QUIT: Remote host closed the connection) (~utukku@cpc95120-newt39-2-0-cust110.19-3.cable.virginm.net) | 02:16 | |
| + bfarmilo (~bfarmilo@202.56.40.240) | 03:05 | |
| - shanshe_ (QUIT: Quit: ZNC 1.7.5 - https://znc.in) (~shanshe@76.red-79-153-246.dynamicip.rima-tde.net) | 09:22 | |
| + RobDangerous (~Thunderbi@p200300ec8f246500880523fbb5c27e35.dip0.t-ipconnect.de) | 09:43 | |
| - RobDangerous (QUIT: Quit: RobDangerous) (~Thunderbi@p200300ec8f246500880523fbb5c27e35.dip0.t-ipconnect.de) | 11:12 | |
| + RobDangerous (~Thunderbi@p200300ec8f246500880523fbb5c27e35.dip0.t-ipconnect.de) | 11:12 | |
| + KK (~KK@93-139-218-96.adsl.net.t-com.hr) | 12:17 | |
| mntmn | hm hm hm. | 12:21 |
| mntmn | trying to pause amiga during zz9000 init until it is ready... | 12:21 |
| KK | ok, some (un)interesting info from me trying to setup network access from the other day...... | 12:23 |
| KK | hw is a4000, zz, deneb, repulse, 16mb + zz ram, 3640 running 060@50 | 12:24 |
| KK | net works only with int2 set, couldnt ever get it up with jumper set to int6 for whatever reason | 12:24 |
| KK | tcp stack is roadshow, managed to get only some 500-650 kB/s | 12:25 |
| mntmn | KK: maybe Q4 is broken (cracked) on the card, if you have R-1/R-2, or deneb or sth interferes with int6 | 12:25 |
| KK | today i bought like all the usb->ethernet adapters i could find in the city and managed to find one which actually works with deneb | 12:25 |
| mntmn | KK: what kind of speed do you get then? | 12:25 |
| KK | speed with deneb is around 250-350 kB/s | 12:26 |
| mntmn | oh, that's worse | 12:26 |
| KK | ye it's shit | 12:26 |
| KK | anyway, int6 is not working for me even when all other zorro cards are out. pulled zz out as well to check q4, doesn't look damaged *shrug* | 12:27 |
| KK | well anyway.... my question then..... any specific reason why i would want to have it jumpered as int6 instead of int2? checked the code, doesn't appear to make a difference right? | 12:27 |
| KK | and the second question.... does the above mentioned speed appear reasonable or am i still missing something? | 12:28 |
| mntmn | kind of reasonable i think | 12:28 |
| KK | (using miami dx as a tcp stack is absolutely horrible, it's at least 4x slower than roadshow if not more) | 12:29 |
| mntmn | there's no reason to use int6 | 12:29 |
| mntmn | int2 is fine | 12:29 |
| KK | kk, gonna leave it as is then | 12:29 |
| + utukku (~utukku@cpc95120-newt39-2-0-cust110.19-3.cable.virginm.net) | 12:38 | |
| - RobDangerous (QUIT: Ping timeout: 252 seconds) (~Thunderbi@p200300ec8f246500880523fbb5c27e35.dip0.t-ipconnect.de) | 14:49 | |
| - KK (QUIT: Quit: Client closed) (~KK@93-139-218-96.adsl.net.t-com.hr) | 18:48 | |
| + gdonner (~gdonner@c-98-253-93-116.hsd1.in.comcast.net) | 19:39 | |
| + KK (~KK@93-139-218-96.adsl.net.t-com.hr) | 19:47 | |
| - utukku (PART: !!unknown attribute: msg!!) (~utukku@cpc95120-newt39-2-0-cust110.19-3.cable.virginm.net) | 20:50 | |
| - gdonner (QUIT: ) (~gdonner@c-98-253-93-116.hsd1.in.comcast.net) | 21:06 | |
Generated by irclog2html.py 2.17.2 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!